Arris C4C - Show Interface Cable-Upstream Mac-Scheduler

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2813
show interface cable-upstream * mac-scheduler
Purpose
Displays the time-slot scheduling state and statistics.
Default Access Level
1
Command Syntax
show interface cable-upstream <slot[/ch>] mac-scheduler [detail] [interval <1-31536000>] {type <req |
req-summary | grants-pending | queues | flows | mslots | mslots-summary>}
Supplemental
Information
N/A
Parameters
<slot[/ch>]]
The chassis slot and optional channel.
[detail]
Displays additional measurement/failure reasons for the state transition.
[interval <1-31536000]
The timespan in seconds to monitor changes in scheduler information.
[type]
The type of scheduler information to display:
req — displays all scheduler request information
req-summary — Displays a summary of scheduler request information.
grants-pending — Displays scheduler grant information
queues — Displays scheduler queue information
flows — Displays scheduler flow information
mslots — Displays all scheduler minislot information
mslots-summary — Displays a summary of scheduler minislot information