Arris C4C - Configure Interface Gigabitethernet Ip Ospf Authentication Key

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1752
configure interface gigabitethernet * ip ospf authentication key
Purpose
Assigns a password to be used by neighboring routers that are using the OSPF simple password authentication.
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>] ip ospf authentication key <password>
configure interface gigabitethernet <slot>/<port>[.<0-254>] ip ospf authentication key [<password>] no
Supplemental
Information
To disable OSPF authentication key, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/gigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]
<password>
Password assigned