Arris C4C - Configure Ip Multicast Default-Group-Service-Class

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2073
configure ip multicast default-group-service-class
Purpose
Sets the name of the default service class to be used by Multicast QoS.
Default Access Level
15
Command Syntax
configure ip multicast default-group-service-class <word>
configure ip multicast default-group-service-class [<word>] no
Supplemental
Information
To remove the name, use the no option
Parameters
<word>
Default DOCSIS QOS service class name associated with IP multicast traffic:
SCNA, SCNB, SCNC, SCND, dsa_a, dsa_b, DSMTAMGCP
SF-02ds.4, SF-02us.4, USMTAMGCP, ipvideo_dn
DSPrimaryBE, SCN_Up_Test, SCN_Up_UGS1, SCN_Up_UGS2
SCN_Up_UGS3, SF-02-2ds.4, SF-02-2us.4, USPrimaryBE
cmcsa_10M_dn, cmcsa_11M_up, cmcsa_30M_dn, cmcsa_30M_up
cmcsa_40M_up, cmcsa_50M_up, cmcsa_55M_dn, cmcsa_55M_up
cmcsa_80M_dn, DS-IGMP-QUERY, SCN_Down_Test
SCN_Up_UGSAD1, SCN_Up_UGSAD2, SCN_Up_UGSAD3
cmcsa_160M_dn, basic_upstream