Arris C4C - Configure Interface Gigabitethernet Ip Pim Hello-Holdtime

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1766
configure interface gigabitethernet * ip pim hello-holdtime
Purpose
Configures the PIM router neighbor hold time option in the Hello message.
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>] ip pim hello-holdtime <int>
configure interface gigabitethernet <slot>/<port>[.<0-254>] ip pim hello-holdtime [<int>] no
Supplemental
Information
To reset the hold time, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/gigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]
<int>
Hold time in seconds