Arris C4C - Configure Router Isis Address-Family Ipv4 Distribute-List out

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2433
configure router isis address-family ipv4 distribute-list * out
Purpose
Configures filtering for IPv4 IS-IS routes.
Default Access Level
15
Command Syntax
configure router isis address-family ipv4 distribute-list <1-99> out [connected | static | rip | ospf |
bgp]
configure router isis address-family ipv4 distribute-list <1-99> out [connected | static | rip | ospf |
bgp] no
Supplemental
Information
To remove the filtering, use the no option.
Parameters
<1-99>
IP standard access list
[connected]
Filters IS-IS routes originating from a connected source.
[static]
Filters IS-IS routes originating from a static configuration.
[rip]
Filters IS-IS routes originating from a RIP.
[ospf]
Filters IS-IS routes originating from a OSPF.
[bgp]
Filters IS-IS routes originating from a BGP.