Arris C4C - Show Configuration and Runtime Information

Chapter 34: Internet Protocol Detail Record
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 967
 The default for the data-ack-window is 200 data messages.
 The default for the data-ack-timeout is 60 seconds.
 The report-cycle-set option only applies to the time and event method.
 The all-counts option only applies to the samis-1 time session. Presence of the all-counts means do not use record
suppression; absence of all-counts means use record suppression.
Show Configuration and Runtime Information
To display the configuration parameters and runtime information:
show cable metering [detail]
An output similar to the following will occur:
IPDR: enabled
query-port: 4737
streaming-port: 4737
keep-alive-interval: 300
session-id: 1
service: samis-1
method: time
data-ack-window: 200
data-ack-timeout: 60
all-counts: true
Collectors data records this collector
(P = primary, A = active) exported------------------ suppressed--
priority IP address interim stop interim
-------- --------------- ------------ ------------ ------------
1 10.1.2.1 0 0 0
2 10.1.2.2 0 0 0
Report Cycle Set 1 data records this report cycle
exported------------------ suppressed--
start interval interim stop interim
----- -------- ------------ ------------ ------------
00:00 15 0 0 0
Session-id: 2
service: samis-1
method: adhoc
data-ack-window: 200
data-ack-timeout: 60
Collectors
(P = primary, A = active) data records this collector
priority IP address during recent activity (max 4)
-------- --------------- ------------------------------
1 10.1.2.1 0
2 10.1.2.2 0
Recent activity (max 4)
data records this
start stop adhoc session
-------------------- -------------------- -----------------
session-id: 3