Arris C4C - Configure Interface Link-Aggregate Ip Pim Hello-Holdtime

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1870
configure interface link-aggregate * ip pim hello-holdtime
Purpose
Configures the PIM router neighbor hold time option in the Hello message.
Default Access Level
15
Command Syntax
configure interface link-aggregate <0-9[.0-254]> ip pim hello-holdtime <int>
configure interface link-aggregate <0-9[.0-254]> ip pim hello-holdtime [<int>] no
Supplemental
Information
To reset the hold time, use the no option.
Parameters
<0-9[.0-254]>
LAG identifier <lag[sub interface]>
<int>
Hold time in seconds