To Next Page

To Previous Page

Chapter 46: Command Line Descriptions

STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide

configure username

Purpose

Adds a new user to the C4 CMTS or changes the password for an existing user.

Default Access Level

Command Syntax

configure username <user_name> [password <password>] [privilege <0-15>]

configure username <user_name> [password <password>] [privilege <0-15>] no

Supplemental

Information

Each user must have a unique system login account in order to gain access to the C4 CMTS and to the command line interface (CLI).

The "encrypted-password" parameter is not intended for user input. It is used internally in the generation of the running-

configuration to prevent the display of cleartest passwords in configuration files.

Note: If spaces or special characters are used in the password, the entire password string must be enclosed in quotation marks. With

the exception of the question mark (?), any special character that displays properly may be used. If the double quotation mark ("") is

used in the password, then the password string must be enclosed in single quotes (for example, ‘pass"word’). The C4 CMTS accepts

passwords longer than sixteen characters, but only the first sixteen are encrypted, stored, and verified upon logging in; therefore,

creating passwords longer than sixteen characters does not increase security.

To delete a previously defined user, use the no option.

Parameters

<user_name>

The login of the person to be added to the list of users.

[password

A unique set of characters linked to the userid which will allow access.

[privilege <0-15>]

Privilege is an integer from 1-15 representing the level of user access. The lowest level is 0; the highest level is 15.

Arris C4C User Manual

Questions and Answers: