Arris C4C - Configure Interface Tengigabitethernet Isis Retransmit-Interval

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2058
configure interface tengigabitethernet * isis retransmit-interval
Purpose
Configures the maximum rate between LSP retransmits for the specified interface.
Default Access Level
15
Command Syntax
configure interface tengigabitethernet <slot>/<port>[.<0-254>] isis retransmit-interval <seconds>
configure interface tengigabitethernet <slot>/<port>[.<0-254>] isis retransmit-interval no
Supplemental
Information
This command is useful in very large networks with many LSPs and many interfaces to control LSP retransmission traffic. This
command controls the rate at which LSPs can be resent on the interface.
To restore the default value, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/tengigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<10>[.<0-254>]
Valid range for the C4c CMTS is <17>/<10>[.<0-254>]
<seconds>
Minimum seconds before retransmitting. Valid range is 1 to 300.