Arris C4C - Configure L2 Vpn Vlanid-Range

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2170
configure l2vpn vlanid-range
Purpose
Declares the VLAN ID ranges that are reserved for L2VPN use and allocated to single or dual Q-tag L2VPN instances.
Default Access Level
15
Command Syntax
configure l2vpn vlanid-range <int> [-<int>] <single-qtag | dual-qtag>
configure l2vpn vlanid-range <int> [-<int>] <single-qtag | dual-qtag> no
Supplemental
Information
To remove the VLAN ID ranges that are reserved for L2VPN use, use the no option.
Parameters
vlanid-range <int> |
Outer VLAN ID value for a single or dual Q-tag. Range is 2 - 4094.
[-<int>]
Optional inner VLAN ID value used for dual Q-tags. Range is 2 - 4094.
<single-qtag | dual-
qtag>
Specifies either single or dual Q-tag encapsulation.