Arris C4C - Configure Interface Gigabitethernet Ip Igmp Host-Robustness

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1740
configure interface gigabitethernet * ip igmp host-robustness
Purpose
Sets the IGMP host robustness.
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>] ip igmp host-robustness <num>
configure interface gigabitethernet <slot>/<port>[.<0-254>] ip igmp host-robustness [<num>] no
Supplemental
Information
To remove the IGMP host robustness, use the no version.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/gigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]
<num>
Robustness number. Valid range is 1-255