Arris C4C - Show Ipv6 Route

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2931
show ipv6 route
Purpose
Displays all active (static and dynamic) routes in the IPv6 route table entries for an IPv6 address.
Default Access Level
1
Command Syntax
show ipv6 route [vrf <name>] [include-inactive] [detail] [include-pd]
Supplemental
Information
N/A
Parameters
[vrf <name>]
Name given to VRF. To display only the default VRF, enter "default" as the VRF name.
[incl-inactive]
Includes all active and dynamic inactive routes. Does not display inactive static routes.
[detail]
Shows same routes in a non-abbreviated format.
[include-pd]
Includes the IPv6 Prefix Delegation routes in the output.