Arris C4C - Сonfigure Interface Cable-Mac Ipv6 Nd Reachable-Time

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1662
configure interface cable-mac * ipv6 nd reachable-time
Purpose
Sets the amount of time a neighbor is considered reachable after last confirmation.
Default Access Level
15
Command Syntax
configure interface cable-mac <mac[.0]> ipv6 nd reachable-time <int>
configure interface cable-mac <mac[.0]> ipv6 nd reachable-time [<int>] no
Supplemental
Information
To return to the default setting, use the no option.
Parameters
<mac[.0]>
The MAC identifier and optional sub interface.
<int>
Time in milliseconds.