Arris C4C - Clear Ip Bgp

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1167
clear ip bgp
Purpose
Clears all peers in specified AS. To clear a specific BGP neighbor address, use the IP address.
Default Access Level
15
Command Syntax
clear ip bgp <word>
Supplemental
Information
The user must enter the address or the autonomous system field. Address is in the form * or an ip address. The * applies to all of the
neighbors. If an address is specified, it applies to only one neighbor.
Parameters
<word>
Use one of the following valid parameters:
* Clears all peers
1-65535 Clears neighbors in this AS
A.B.C.D IP address of BGP neighbor to clear