Arris C4C - Clear Ip Route Rip

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1170
clear ip route * rip
Purpose
Clears the IP route table entries for RIP routes. Next hop defaults to 0.0.0.0 if not specified.
Default Access Level
1
Command Syntax
clear ip route [vrf <vrf-name>] rip
Supplemental
Information
N/A
Parameters
[vrf <vrf-name>]
The name assigned to the virtual router. If the name is not specified, the ip route table for the default vrf will be cleared.