Chapter 31: Load Balancing
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 903
Verify the Configuration
The following commands can be used to confirm the current load balance configuration using the configuration
parameters assigned above:
show cable load-balance
Load Balance: Enabled
Init Technique: Ranging
Mac Domain Check (sec) : 300
Across Mac Domain Check (sec) : 0
Downstream Start Threshold (% utilization): 60
Upstream Start Threshold (% utilization): 60
Failed-list age out time (in hours): 24
Failed-list exclude count: 2
Number of CMs to check per Interval: 10
Across Mac Domain Check (sec) : 0
show cable load-balance group
Ena- Init Cable
Group bled Policy Tech mCMsg Mac Fiber-Node Type Service Type Id
---------- ---- ---------- --------- ----- ----- ------------ ------- -----------------
16779264 yes 2 ranging 1 1 FN1 General -
show cable load-balance policy
Steering
Thres Disable Registration Periodic Channel
Policy Rule Enabled -hold Method Start Period D2.0 D3.0 D2.0 D3.0 Weight Type
---------- ---------- -------- ----- ------ ------------------ ----- ----- ----- ----- ------- ------------------------
Default(0) - yes 10% modem 00:00:00 00:00:00 - - - - - Static,DCC
2 2 yes 10% util 00:00:00 00:00:00 False False False False equal Static,DCC,B-US-DBC,B-DS-DBC
Key to Types:
DCC : NonBonded DCC
B-DCC : Bonded DCC
B-US-DBC: Bonded Upstream DBC
B-DS-DBC: Bonded Downstream DBC
show cable load-balance channels
To Next Page
Loading...
