Arris C4C - Configure Router Rip Distance

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2508
configure router rip * distance
Purpose
Configures the administrative distance for RIP routes in the same VRF.
Default Access Level
15
Command Syntax
configure router rip [vrf <name>] distance <int>
configure router rip [vrf <name>] distance <int> no
Supplemental
Information
To disable the administrative distance for RIP routes, use the no option.
Parameters
[vrf <name>]
Name of the assigned VRF.
<int>
Administrative distance