Arris C4C - Enable

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2583
enable
Purpose
Allows the user access to the privileged mode commands.
Default Access Level
0
Command Syntax
enable [<1-15>]
enable [<1-15>] no
Supplemental
Information
Password protection may be used to restrict access. If password protection has been invoked, you will be prompted to enter the
password.
Note: Passwords are defined on a privilege level and not defined by individual users so each level has its own unique password.
To disable privileged access and return to User EXEC mode, use the no option.
Parameters
[<1-15>]
Sets the privilege level. If no parameter is supplied, the default level is 15.
Related Commands
disable (page 2580)
configure enable (page 1463)
configure privilege exec level (page 2234)