Arris C4C - File System Administration CLI Commands; Reload Commands

Chapter 6: System Control Module (SCM)
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 205
File System Administration CLI Commands
There are several CLI commands that are useful when performing a system backup. These commands and their
functionality are described in the following table.
Table 19. File System Administration CLI Commands
Use This Command…
To…
cd
change working directory
copy
copy files specified
delete
delete specified files
dir
list files and directories
df
display disk usage
mkdir
make a new directory
pwd
display present working directory
rmdir
remove a specified directory
Reload Commands
The reload command comes in five versions—reload, reload update, reload retain-patches, reload commit, and show
reload status. Each is explained below.
Table 20. Reload Command Formats
Purpose
CLI Command
Boot the system from system image that resides in the Active
partition.
reload
Reboot the system from the file specified in the Update partition.a
reload /update/filename