Arris C4C - Configure Interface Cable-Mac Ipv6 Address

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1644
configure interface cable-mac * ipv6 address
Purpose
Configures the specified cable interface IPv6 address.
Default Access Level
15
Command Syntax
configure interface cable-mac <mac[.0]> ipv6 address <address> [eui-64] [link-local] [dhcp-link-address
<cable-modem | any | host>]
configure interface cable-mac <mac[.0]> ipv6 address [<address>] [eui-64] [link-local] [dhcp-link-
address <cable-modem | any | host>] no
Supplemental
Information
To remove the specified cable interface IPv6 address, use the no option.
Parameters
<mac[.0]>
The MAC identifier and optional sub interface.
<address>
Address of the DHCP server
[eui-64]
Configures the site-local and global IPv6 addresses with an interface identifier (ID) in the low-order 64 bits of the IPv6 address.
[link-local]
Overrides the automatically generated EUI-64 link local address.