Arris C4C - Configure Interface Cable-Upstream Cable Voice-Limits

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1721
configure interface cable-upstream * cable voice-limits
Purpose
Sets the PacketCable CAC parameters for all upstream and downstream channels.
Default Access Level
15
Command Syntax
configure interface cable-upstream <s/ch> cable voice-limits <allowed-normal> <allowed-emergency>
<allowed-total> <reserved-emergency> <reserved-normal>
Supplemental
Information
N/A
Parameters
<s/ch>
The upstream slot/channel.
<allowed-normal>
Maximum percent downstream and upstream channel bandwidth allowed for normal voice use. Valid range is 0 to 90.
<allowed-
emergency>
Maximum percent downstream and upstream channel bandwidth allowed for emergency voice use. Valid range is 0 to 90.
<allowed-total>
Percent downstream and upstream channel bandwidth allowed for all classes of voice traffic. Valid range is 0 to 90.
<reserved-
emergency>
Minimum percent downstream and upstream channel bandwidth allowed for emergency voice use. Valid range is 0 to 90.
<reserved-normal>
Minimum percent downstream and upstream channel bandwidth allowed for normal voice use. Valid range is 0 to 90.
Related Commands
show interface cable-upstream (page 2810)