Arris C4C - Configure Router Rip Redistribute Isis

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2517
configure router rip * redistribute isis
Purpose
Configures redistribution routes from Intermediate System-to-Intermediate System (IS-IS) routing processes into RIP.
Default Access Level
15
Command Syntax
configure router rip [vrf <name>] redistribute isis [<level1 | level-1-2 | level-2>] [metric <int>]
configure router rip [vrf <name>] redistribute isis [<level1 | level-1-2 | level-2>] [metric <int>] no
Supplemental
Information
To restore the system to its default condition, use the no option.
Parameters
[vrf <name>]
The name assigned to the virtual router
[<level1 | level-1-2
| level-2>]
Enumerates the type of IS-IS routes to redistribute into RIP.
[metric <int>]
Metric associated with redistributed routes