Arris C4C - Configure Interface Gigabitethernet Description

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1728
configure interface gigabitethernet * description
Purpose
Allows you to add a comment or a description to help you remember what is attached to this interface.
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>] description <text>
configure interface gigabitethernet <slot>/<port>[.<0-254>] description no
Supplemental
Information
To remove the description, use the no option.
Parameters
<slot>/<port>[<.0-
254>]
RCM slot number/gigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]
<text>
Descriptive information, e.g., identifies area served. Text is limited to 32 characters.