Arris C4C - Show Qos-Sc Subscriber-Usage

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 3015
show qos-sc * subscriber-usage
Purpose
Displays the subscriber (CM) usage for service flows having an enforce rule.
Default Access Level
1
Command Syntax
show qos-sc [name <name>] subscriber-usage [cable-mac <int>] [cm-mac <word>]
Supplemental
Information
N/A
Parameters
[name <name>]
QoS service class name.
[cable-mac <int>]
Filters by cable-mac.
[cm-mac <word>]
Filters by cable-modem MAC address.