Arris C4C - Configure Cable Privacy Ca-Cert-Trust

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1413
configure cable privacy ca-cert-trust
Purpose
Provides the ability to change the trust state of an existing X.509 digital certificate authority (CA) certificate.
Default Access Level
15
Command Syntax
configure cable privacy ca-cert-trust <index> [trusted] [untrusted] [chained] [root]
configure cable privacy ca-cert-trust <index> [trusted] [untrusted] [chained] [root] no
Supplemental
Information
Note: This command is applicable to BPI+ modem operation and has no affect on BPI operation.
To return to the default state, use the no option.
Parameters
<index>
CA Certificate index. Valid range is 1-100
[trusted |
CM certificate trust state is trusted.
untrusted |
CM certificate trust state is untrusted.
chained |
CA certificate trust state is chained.
root]
CA certificate trust state is root.