Arris C4C - Сonfigure Interface Link-Aggregate Ip Rip Authentication Mode Text

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1880
configure interface link-aggregate * ip rip authentication mode text
Purpose
Configures the RIP authentication mode to clear text authentication
Default Access Level
15
Command Syntax
configure interface link-aggregate <0-9[.0-254]> ip rip authentication mode text
configure interface link-aggregate <0-9[.0-254]> ip rip authentication mode text no
Supplemental
Information
By default, it is disabled on each interface.
To disable the authentication mode, use the no option.
Parameters
<0-9[.0-254]>
LAG identifier <lag[sub interface]>