Arris C4C - Configure Snmp-Server Notify-Filter Profile

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2548
configure snmp-server notify-filter profile
Purpose
Sets the filter profile to be used for generating notifications.
Default Access Level
15
Command Syntax
configure snmp-server notify-filter profile <name> subtree <subtree> type <included | excluded>
configure snmp-server notify-filter profile <name> subtree <subtree> [type <included | excluded>] no
Supplemental
Information
To remove the filter profile, use the no option.
Parameters
<name>
The notify-filter profile name.
<subtree>
The MIB subtree which is included in or excluded from the filter profile.
<included |
excluded>
The type is either included or excluded.