Arris C4C - Show Ip Bgp Neighbor Advertised-Routes Paths

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2822
show ip bgp neighbor * advertised-routes paths
Purpose
Displays the advertised paths for the routes identified via the Border Gateway Protocol (BGP).
Default Access Level
5
Command Syntax
show ip bgp neighbor [<A.B.C.D>] advertised-routes paths
Supplemental
Information
N/A
Parameters
[<A.B.C.D>]
Address of the neighbor for which information is requested. If no address is given, all neighbors are displayed.