Arris C4C User Manual

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1424
configure cable shared-secret
Purpose
Sets the authorization string for MIC checking.
Default Access Level
15
Command Syntax
configure cable shared-secret <authentication-key> [hidden]
configure cable shared-secret no
Supplemental
Information
The [hidden] parameter is only used when the command is generated by the running-config. When used, the authentication-key
parameter has already been encrypted and is copied directly in the MIB variable. The user should not use the hidden parameter,
allowing the system to properly encrypt the authentication key before putting into the MIB variable.
To remove the shared-secret, use the no version.
Parameters
<authentication-
key>
MIC authorization string, max 64 characters (64 hex ASCII char codes if hidden).

Arris C4C Specifications

General

Brand	Arris
Model	C4C
Category	Control Unit
Language	English