Arris C4C - Displaying Current IS-IS Configuration; Example Show Commands

Chapter 16: Dynamic Routing Protocols
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 484
Building configuration...
Current configuration : 282 bytes
!
interface GigabitEthernet 2/20
description C4-35,port 17/9
ip address 10.85.9.1 255.255.255.0
ip router isis
ipv6 address 2001:db8:C435:1709::1/64
ipv6 router isis
end
The following information is also useful:
show running-config | router isis
router isis
net 47.0001.0100.8500.9001.00
metric-style wide
no hello padding
log-adjacency-changes
redistribute connected
redistribute static ip
!
address-family ipv6
multi-topology
redistribute static
exit-address-family
!
Example Show Commands
The following section contains a group of commands most commonly used to display MT IS-IS information.
Displaying Current IS-IS Configuration
To display the current IS-IS configuration, use the following command:
show isis database detail
To display the IS-IS neighbor output including the remote router’s MT setting, use the following command:
show isis neighbor
The system output would look similar to the following: