Arris C4C - Interface Cable-Mac;Cable Rcp-ID Rcc CM-Channel Cable-Downstream

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1563
configure interface cable-mac * cable rcp-id * rcc * cm-channel * cable-downstream
Purpose
Configures the frequency assigned to the channel via a specific downstream port.
Default Access Level
15
Command Syntax
configure interface cable-mac <mac> cable rcp-id <hex> rcc <int> cm-channel <1-32> cable-downstream
<int>
configure interface cable-mac <mac> cable rcp-id <hex> rcc <int> cm-channel <1-32> cable-downstream no
Supplemental
Information
To remove this record, use the no option.
Parameters
<mac>
The MAC identifier. Valid numbers are 0-415.
<hex>
Receive channel profile ID in hex (5 byte).
<int>
Unique RCC ID for rcp-id defined earlier
<1-32>
Must be unique within the RCC; it identifies the receive mode instance within the RCC and corresponds to the attribute.
<int>
Refers to the <slot/ds port>