Arris C4C - Router Bgp Neighbor Update-Source Tengigabitethernet Remote-As

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2422
configure router bgp * neighbor * update-source tengigabitethernet * remote-as
Purpose
Configures the source address for the session.
Default Access Level
15
Command Syntax
configure router bgp [<int>] neighbor <A.B.C.ipv6> update-source tengigabitethernet <6-7>/<0-7>[.<0-
254>] remote-as <int>
Supplemental
Information
N/A
Parameters
[<int>]
Autonomous System (AS) number. Valid range is 1-65535
<ipv6
IP Address
<number>
RCM slot number/tengigabitEthernet port number.
Valid range for the C4 CMTS is <17-18>/<10>
Valid range for the C4c CMTS is <17>/<10>
<int>
Autonomous System (AS) number of the neighbor