Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2575
copy * running-config
Copy the file specified to the running-config file.
copy <file> running-config [full] [verbose]
Caution - Uses the specified file to redefine the system configuration. Its basic purpose is to quickly apply a known configuration to
an inactive system. Do not execute this command on an active system
Note: Copies of the running config, cacert-config and provcmcert-config files of the current configuration should always be backed-
up in the event they need to be reloaded after an upgrade. If you don’t perform this step, you will have to reconfigure the slots,
modules, ports, and security certificates. The backup server must be running a TFTP server and the file names used must exist in the
tftpboot directory.
Parameters
Path to the file to be copied over
To copy remote files, use one of the following:
tftp://<host>/<file>
-or-
ftp://username:pwd@<host>/<file>
Displays all configuration values, including default values.
Displays the output with "configure" on each line.
To Next Page
Loading...
Need help?
General
