Arris C4C - Configure Interface Link-Aggregate Ip Pim Dr-Priority

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1869
configure interface link-aggregate * ip pim dr-priority
Purpose
Configures the PIM Designated Router priority on the specified interface.
Default Access Level
15
Command Syntax
configure interface link-aggregate <0-9[.0-254]> ip pim dr-priority <int>
configure interface link-aggregate <0-9[.0-254]> ip pim dr-priority [<int>] no
Supplemental
Information
To reset the priority, use the no option.
Parameters
<0-9[.0-254]>
LAG identifier <lag[sub interface]>
<int>
DR priority, preference is given to larger value