Arris C4C - Configure Cable Filter Group Index Ip-Tos

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1277
configure cable filter group * index * ip-tos
Purpose
Configures the IP packet filtering parameters for the specified packet filter group, index setting and IP TOS byte settings.
Default Access Level
15
Command Syntax
configure cable filter group <1-1023> index <1-63> [dest-ip <ipv4 addr>] [dest-mask <ipv4 mask>] [dest-
port <0-65535>] [ip-proto <int>] [src-ip <ipv4 addr>] [src-mask <ipv4 mask>] [src-port <0-65536>]
[match-action {accept | drop}] [v6-dest-address <ipv6 addr>] [v6-dest-pfxlen <0-128>] [v6-src-address
<ipv6 addr>] [v6-src-pfxlen <0-128>] [v6-flow-label <0-1048575>] [ip-version <ipv4 | ipv6 | unknown>]
ip-tos <mask> <tos value>
Supplemental
Information
N/A
Parameters
<1-1023>
The number assigned to the group.
index <1-63>
The index of a filter within the current group.
[dest-ip <ipv4 addr>]
IP destination address
[dest-mask <ipv4 mask>]
IP destination address mask
[dest-port <0-65535>]
UDP destination port
[ip-proto <int>]
IP protocol
[src-ip <ipv4 addr>]
IP source address
[src-mask <ipv4 mask>]
IPv4 source mask address
[src-port <0-65536>]
UDP source port
[match-action {accept | drop}]
Filter match action processing