Arris C4C User Manual

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1818
configure interface gigabitethernet * isis ds-hello-interval
Purpose
Configures the length of time in milliseconds between hello packets for the specified interface when it is DS.
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>] isis ds-hello-interval <10-12000> [<level1 |
level2>]
configure interface gigabitethernet <slot>/<port>[.<0-254>] isis ds-hello-interval [<level1 | level2>]
no
Supplemental
Information
To restore the default value, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/gigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]
<10-120000>
Milliseconds between hello packets. Valid range is 10-120000. Default value is 1000 milliseconds.
[<level1 | level2>]
Specifies the type of adjacencies to be formed on this interface. If no value is specified, then modify value for both level-1 and level-
2.

Arris C4C Specifications

General

Brand	Arris
Model	C4C
Category	Control Unit
Language	English