Arris C4C - Configure Interface Cable-Mac;Cable Tftp-Enforce

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1575
configure interface cable-mac * cable tftp-enforce
Purpose
Configures TFTP enforcement.
Default Access Level
15
Command Syntax
configure interface cable-mac <mac> cable tftp-enforce <mark-only | block | lock>
configure interface cable-mac <mac> cable tftp-enforce <mark-only | block | lock> no
Supplemental
Information
CAUTION; Using the <CR> without specifying the block/lock/mark-only parameter can be service affecting and cause
modems not to register.
To disable TFTP enforcement (applies to IPv4 and IPv6), use the no option.
Parameters
<mac>
The MAC identifier. Valid numbers are 0-415.
<mark-only |
Allows registration but marks violating modems with a #.
block |
Blocks modem violating TFTP enforce checks from learning any CPEs.
lock>
Lock modems violating TFTP enforce checks with limited bandwidth.