Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1431
configure cable spectrum-group * sample-period
Defines the time between samples used for the degradation and the improvement triggers.
configure cable spectrum-group <sm_ID> sample-period <1-60>
configure cable spectrum-group <sm_ID> sample-period [<1-60>] no
To reset to the default state, use the no option.
Parameters
The number of the spectral group and has a value from 0-40.
The time between samples. The value is in seconds and has a range of 1 to 60. The default value is 4 seconds.