Arris C4C - Configure Interface Gigabitethernet Ipv6 Nd Ns-Interval

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1790
configure interface gigabitethernet * ipv6 nd ns-interval
Purpose
Sets the minimum interval for neighbor solicitation re-transmissions on the specified interface.
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>] ipv6 nd ns-interval <1000-3600000>
configure interface gigabitethernet <slot>/<port>[.<0-254>] ipv6 nd ns-interval [<1000-3600000>] no
Supplemental
Information
Use the ‘no’ option to not specify a value for Retransmit Time.
Parameters
<slot><port>[.<0-
254>]
RCM slot number/gigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]
<1000-360000>
Interval in milliseconds.