Arris C4C User Manual

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2133
configure ipv6 router ospf area * range
Purpose
Consolidates and summarizes routes at an area boundary.
Default Access Level
15
Command Syntax
configure ipv6 router ospf area <word> range <ipv6 addr/prefix> [advertise | not-advertise]
configure ipv6 router ospf area <word> range <ipv6 addr/prefix> [advertise | not-advertise] no
Supplemental
Information
To return to the default, use the no option.
Parameters
<word>
OSPF area ID. It can be specified as either an IP address or decimal value.
<ipv6 addr/prefix>
Format: 4-hex-digits:4-hex-digits:.../prefix length.
[advertise |
Sets the address range status to advertise and generate a Type 3 summary LSA.
not-advertise]
Sets the address range status to DoNotAdvertise. Type 3 summary LSAs are suppressed.

Arris C4C Specifications

General

Brand	Arris
Model	C4C
Category	Control Unit
Language	English