Arris C4C - Clear Arp-Cache

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1134
clear arp-cache
Purpose
Deletes the entry from the Address Resolution Protocol (ARP) table if the IP address is specified.
Default Access Level
15
Command Syntax
clear arp-cache [<ip address>]
Supplemental
Information
If the IP address is not specified, all dynamic entries from the ARP cache table will be deleted.
Parameters
[<ip address>]
This may be any Internet address. The IP address should be in dotted decimal (nnn.nnn.nnn.nnn) format