Arris C4C - Configure Interface Tengigabitethernet Ip Ospf Network

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1991
configure interface tengigabitethernet * ip ospf network
Purpose
Configures the OSPF network type to a type other than the default for a given media.
Default Access Level
15
Command Syntax
configure interface tengigabitethernet <slot>/<port>[.<0-254>] ip ospf network <type>
configure interface tengigabitethernet <slot>/<port>[.<0-254>] ip ospf network <type> no
Supplemental
Information
To reset the OSPF network type back to the default, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/tengigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<10>[.<0-254>]
Valid range for the C4c CMTS is <17>/<10>[.<0-254>]
<type>
This is the network type. Valid types are broadcast and point-to-point.