Arris C4C - Configure Router Bgp Address-Family Ipv4 Neighbor Prefix-List in

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2345
configure router bgp * address-family ipv4 neighbor * prefix-list * in
Purpose
Configures the filter list applied to incoming advertisements from the specified neighbor.
Default Access Level
15
Command Syntax
configure router bgp [<int>] address-family ipv4 neighbor <a.b.c.d> prefix-list <word> in
configure router bgp [<int>] address-family ipv4 neighbor <a.b.c.d> prefix-list [<word>] in no
Supplemental
Information
To remove a filter list, use the no option.
Parameters
[<int>]
Autonomous System (AS) number. Valid range is 1-65535
<a.b.c.d>
Neighbor IP address.
<word>
Prefix list name.