Arris C4C - Configure Slot Type

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2532
configure slot * type
Purpose
Adds a linecard to the slot.
Default Access Level
15
Command Syntax
configure slot <slot> type <type> [name <name>]
configure slot <slot> [type <type>] [name <name>] no
Supplemental
Information
To remove a configured linecard, use the no option.
Parameters
<0-20>
Chassis slot number
<type>
Module type: Current valid names are:
 12UCAM
 24UCAM
 16DCAM
 32DCAM-A
 32DCAM-B
 RCM
 SCM
[name <name>]
Module name, e.g. Cable Access Module, System Control Module