Arris C4C - Show Cable Dsg Tunnel

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2645
show cable dsg tunnel
Purpose
Displays the information for the specified DSG tunnel
Default Access Level
1
Command Syntax
show cable dsg tunnel <0-4294967295> [classifier]
Supplemental
Information
Note: An asterisk symbol (*) is used to indicate the "group index" does not have provisioning.
Parameters
<0-4294967295>
The tunnel identifier.
[classifier]
Displays the DSG tunnel classifier information.
Example
CMTS> show cable dsg tunnel
Tunnel Group Client Tunnel Service
Index Index ID List MAC Address Class Name
---------- ----------- ----------- -------------- -------------------------
10 10 1 0100.0000.0010
20 20 2 0100.0000.0020
40 40 5 0100.0000.0040
200 200 20 0100.0000.0200
300 300 30 0100.0000.0300
320 320 40 0100.0000.0320