Arris C4C User Manual

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2006
configure interface tengigabitethernet * ip rip authentication mode
Purpose
Configures the RIP authentication mode on the specified interface.
Default Access Level
15
Command Syntax
configure interface tengigabitethernet <slot>/<port>[.<0-254>] ip rip authentication mode
configure interface tengigabitethernet <slot>/<port>[.<0-254>] ip rip authentication mode no
Supplemental
Information
By default, it is disabled on each interface.
To reset the authentication mode to text mode, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/tengigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<10>[.<0-254>]
Valid range for the C4c CMTS is <17>/<10>[.<0-254>]

Arris C4C Specifications

General

Brand	Arris
Model	C4C
Category	Control Unit
Language	English