Arris C4C - Configure Interface Link-Aggregate Isis Ds-Hello-Interval

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1921
configure interface link-aggregate * isis ds-hello-interval
Purpose
Configures the length of time in milliseconds between hello packets for the specified interface when it is DS.
Default Access Level
15
Command Syntax
configure interface link-aggregate <0-9[.0-254]> isis ds-hello-interval <10-12000> [<level1 | level2>]
configure interface link-aggregate <0-9[.0-254]> isis ds-hello-interval [<level1 | level2>] no
Supplemental
Information
To restore the default value, use the no option.
Parameters
<0-9[.0-254]>
LAG identifier <lag[sub interface]>
<10-120000>
Milliseconds between hello packets. Valid range is 10-120000. Default value is 1000 milliseconds.
[<level1 | level2>]
Specifies the type of adjacencies to be formed on this interface. If no value is specified, then modify value for both level-1 and level-
2.