Arris C4C - Сonfigure Interface Cable-Mac Isis Ipv6 Metric

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1682
configure interface cable-mac * isis ipv6 metric
Purpose
Configures the IPv6 metric for the specified interface.
Default Access Level
15
Command Syntax
configure interface cable-mac <mac[.s]> isis ipv6 metric <1-16777215> [<level1 | level2>]
configure interface cable-mac <mac[.s]> isis ipv6 metric [<1-16777215>] [<level1 | level2>] no
Supplemental
Information
This command applies only when multi-topology has been selected with the configure router isis address-family ipv6
multi-topology.
To restore the default value, use the no option.
Parameters
<mac[.s]>
The MAC identifier and optional sub interface.
<1-16777215>
Metric used to calculate routing cost.
[<level1 | level2>]
Applies metric to Level-1 links or Level-2 links.
Related Commands
configure router isis address-family ipv6 multi-topology (page 2444)