To Next Page

To Previous Page

Chapter 46: Command Line Descriptions

STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide

configure cable dsg client-id-list

Purpose

Configures the client identifier lists to be associated with a DSG tunnel.

Default Access Level

Command Syntax

configure cable dsg client-id-list <0-4294967295> [index <0-4294967295>] [type {broadcast | mac-address

| ca-system-id | application-id}] [value <word>] [ [vsp-list <num>]

configure cable dsg client-id-list <0-4294967295> [index <0-4294967295>] [type {broadcast | mac-address

| ca-system-id | application-id}] [value <word>] [vsp-list <num>] no

Supplemental

Information

This command may be entered multiple times to add multiple client IDs in the same list.

To remove a client ID list or entry from the client ID list, use the no option.

Parameters

<0-4294967295>

Unsigned integer which is the Client ID List Identifier.

[index <0-

4294967295>]

Index for the given client identifier list. Valid numbers are any unsigned integer values.

[type <broadcast |

mac-address | ca-

system-id |

application-id>]

Type of client ID. Valid values are <broadcast | mac-address | ca-system-id | application-id>

[value <word>]

For the Broadcast type the following values have special meaning:

1. Contains SCTE-65 [SCTE-65] - Delivery as defined in Annex D

2. Contains SCTE-18 [SCTE-18] - Delivery as defined in Annex D

3. Contains OCAP Object Carousel [OC-SP-OCAP1.0]

4. Contains OpenCable Common Download Carousel [OC-SP-CD-IF]

For all other types, this is the DSG client type.

Arris C4C User Manual

Questions and Answers: