Arris C4C - Configure Router Bgp Address-Family Ipv4 Neighbor Default-Originate

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2341
configure router bgp * address-family ipv4 neighbor * default-originate
Purpose
Enables the exchange of information with a GP neighboring router.
Default Access Level
15
Command Syntax
configure router bgp [<int>] address-family ipv4 neighbor <a.b.c.d> default-originate [route-map <word>]
configure router bgp [<int] address-family ipv4 neighbor <a.b.c.d> default-originate [route-map <word>]
no
Supplemental
Information
To disable, use the no option.
Parameters
[<int>]
Autonomous System (AS) number. Valid range is 1-65535
<a.b.c.d>
Neighbor IPv4 address.
<word>
Name of the route map.